Standard Equipments ![]() ![]() |
PUNCHING | HKM 55 | HKM 65 |
Diameter x max. thickness | Ø 20 x 20 mm | Ø 26 x 20 mm | |
Diameter x thickness | Ø 40 x 10 mm | Ø 55 x 10 mm | |
Maximum Diameter | Ø 100 x 3 mm | Ø 110 x 3 mm | |
Stroke | 60 mm | 55 mm | |
Stroke count in (20 mm) | x 25 | x 25 | |
Throat depth | 255 mm | 305 mm | |
Working height | 1030 mm | 1030 mm | |
Standard Equipments ![]() |
STEEL BAR SHEAR | HKM 55 | HKM 65 |
Round / Square | Ø 40- 40 mm | Ø 45- 45 mm | |
Standard |
ANGLE SHEAR | HKM 55 | HKM 65 |
Angle section (90°) | 120 x 120 x 12 mm | 120 x 120 x 12 mm | |
Angle section (45°) | 70 x 10 mm | 70 x 10 mm | |
Working height | 1130 mm | 1140 mm | |
Standard Equipments ![]() |
SHEET METAL SHEAR | HKM 55 | HKM 65 |
Sheet metal | 200 x 20 mm | 300 x 20 mm | |
Sheet metal | 300 x 15 mm | 375 x 15 mm | |
Blade Length | 317 mm | 380 mm | |
Shearing with angle | 80 x 15 mm | 100 x 15 mm | |
Working height | 900 mm | 900 mm | |
Standard Equipments ![]() |
NOTCHING | HKM 55 | HKM 65 |
Thickness | 10 mm | 10 mm | |
Width | 45 mm | 45 mm | |
Depth | 90 mm | 90 mm | |
Working height | 900 mm | 900 mm | |
Optional |
OPTIONAL TOOLS | HKM 55 | HKM 65 |
U-I Section blades (for UPN - IPN cutting) |
120 x 58 mm | 120 x 58 mm | |
80 x 9 mm | 90 x 11 mm | ||
Optional Equipments ![]() |
Special V-Notching tooling |
100 x 100 x 10 mm | 100 x 100 x 10 mm |
Optional Equipments ![]() |
V - bending Press Brake Bar bend Max. |
250 x 12 mm | 250 x 15 mm |
V - bending Press Brake Sheet bend. max. |
500x3 mm | 500x3 mm | |
![]() |
TECHNICAL DATA | HKM 55 | HKM 65 |
Motor Power | 5. 5 kW | 5. 5 kW | |
Weight | 1550 kg | 1600 kg | |
Machine Dimensions (LxWxH) |
1700x950x1880 mm | 1700x950x1880 mm | |
Power (Pressure) | 55 ton | 65 ton |
115 ton represents the tonnage power capacity of punching side. They are made of seperately dual piston and double pedal models which equipped with a total of 5 workstations. An electric motor that produces 11KW power is used on the machine. This power supplied from this motor transferred to the area of the piston on the body by means of the hydraulic oil and the tubes.
No. 5 workstation is a notching section. No. 4 workstation is flat bar cutting section. No. 3 workstation Round- square steel bars can be cut, No. 2 workstation for cutting Angle bars in 45 and 90 degrees . All of these workstations are under the control of a single pedal and movement of all these 4 workstations are provided with this pedal.In addition, a certain degree of V bending operation procedure can be performed with a pressbrake tool to be placed in the station.
The stroke of the pistons can be adjusted according to the thickness of the desired material to be cut. Once shifting the button over the electric panel to “Stroke Adjustment” it can be set to the desired operation height by pressing the foot pedal and then the fixing is done in the upper part of machine body by means of stroke switch. Moreover, in order to assist in the cutting process has improved automatic backgauge as standard . It is being activated with a button on the electric panel. When backgauge property is on than it comes pedal usage off and when profile or bar reaches to sensor it is being cut automaticaly.